Inspection of the teeth. The main working part of the rotary tiller is the cutter teeth that are in direct contact with the soil. Due to the high speed, high strength and harsh working environment, the cutter teeth will be deformed, broken and wrapped around the grass frequently, which will affect the effect of the operation. Therefore, it is necessary to observe the quality of the work from time to time during the operation. If the quality is found to be deteriorated, it is necessary to check whether it is caused by factors such as deformation, breaking or entanglement of the blade teeth. Therefore, it is recommended to carry a few teeth and tools with you for timely replacement.
The maintenance of the rotary tiller. There will be holes for filling grease on the top and side of the rotary tiller. Personally, it is recommended to stop the filling of grease once a day during the work trip to meet the needs of high-speed rotation for lubrication, and also to remove impurities. Grease cleaning reduces internal wear; moreover, there will be a transmission box in the middle of the rotary tiller, which requires gear oil lubrication due to the large load of the transmission box. Generally speaking, the quantity of gear oil in the transmission box of the newly purchased rotary tiller is insufficient, and you need to supplement it yourself. So as not to cause excessive wear and tear on the transmission case, the lubrication will affect the service life.
working environment. The main function of the rotary cultivator is to crush the soil, but it is not recommended to use the rotary cultivator directly for hard soil and soil with more sand and gravel. On the one hand, the working effect is not good, and it takes multiple operations to achieve the estimated effect; on the other hand, it is easy to cause damage to the blades of the rotary tiller. For the hard-textured arable land, it is recommended to plough it first, and then use the rotary tiller to prepare the land; for the arable land with high sand and gravel content, you need to find a way to deal with it yourself. Otherwise, the breakage of the blade teeth of the rotary tiller must be very frequent. At the same time, it also needs to be explained that during the operation of the rotary tiller, the front and side of the rotary tiller prevent people from standing at close range to avoid safety accidents.